
Yesterday, while playing through Half-Life 2 (this time at 1600 x 1200 … :-D), I noticed that, after playing for a while, the game began stuttering. Strangely enough, changing the graphics and audio settings didn’t make things any better. Even down at 640 x 480 with everything as low as it would go, the game was still quite choppy. So I got looking around the web, and began wondering if my new AMD dual-core processor was the problem.
I found a number of pointers to CPU drivers, dual core optimizers, a hot-fix from Microsoft, and more. But one forum post in particular caught my eye. It has links to all of the aforementioned fixes, and contains a number of tips on how to get games to work properly in a dual-core environment. This morning, I installed the latest nForce chipset drivers from nVIDIA, as well as the dual-core optimizer from AMD. The nForce drivers have unfortunately made my SATA hard drives appear as removable, which is odd but understandable considering that SATA drives support hot-swap functionality. And the dual-core optimizer seems to have removed the stuttering (though I haven’t played as long today as I did yesterday; I still need to investigate whether this has truly fixed the problem or not).
Anyways, if you happen to have a dual-core processor, and are concerned about game stuttering, I highly recommend the forum post above. Perhaps the steps I’ve taken so far will fix the problems I was seeing.
Not too long ago, I posted a Zalman VF900 review and, due to my lack of a digital camera at the time, failed to post any images about the install process. Now that I have a camera, and due to my recent computer rebuild, I have posted a small photo set of the install process.
This time around, installation was much easier since I knew what to expect. Thankfully, the stock cooler on the eVGA GeForce 7900GT was easy to remove, unlike my previous card. And the Zalman cooler is, as always, a snap to install. Although I don’t have any current screenshots, my temperatures on this new card are phenomenal. The idle temperature stays around 40 degrees Celsius, and the highest load temperature I’ve seen has been a paltry 45 degrees! As I said before, I highly recommend the Zalman cooler; it truly works wonders.
This weekend I had the great fortune of rebuilding my personal computer. It turned out to be quite an experience, and surprisingly frustrating at times. Before I detail the problems I ran into, here’s a list of the new components I put into it:
I have also put up a small photo series detailing my progress, for those interested (more on this in a moment). Fortunately, it doesn’t contain any photos of my frustrations.
After assembling everything in the system, I plugged it in and turned it on. For a fraction of a second, the system begins to boot; after that, nothing but silence. I try again, with even worse luck the second time: nothing happens at all. Panic instantly sets in. Frustrated, I surf the web looking for answers but come up empty handed. My dad suggests that it sounds like power supply issues so, one by one, I disconnect every device from the supply. After getting down to just the motherboard, CPU, and memory, things begin working. Slowly but surely I replace the items and, to my delight, everything eventually works.
I tried out Windows slipstreaming for the first time, and was pleasantly surprised with how well it worked. I was able to load Service Pack 2 instantly, bypassing the oh-so-annoying Windows update process. Interestingly enough, I still had a total of 55 critical updates to be applied, and even more for Microsoft Office. I’m slowly getting things back to normal, and I look forward to doing a little gaming in the near future.
I’ll have another Zalman VF-900 blog post here soon, detailing the install process (as well as my second no-power adventure with my new machine).
As I noted earlier, I have posted a photo series here at this blog covering my computer building experience. I am trying out the Plogger photo gallery software for my photos, so feel free to check out my main collection (I have replaced Plogger with Monkey Album, my own photo album software). Plogger has a few bugs, and a few features I dislike, but I’m going to try it out for a while (until I can write my own). If you see a problem anywhere in the gallery software, let me know. Hopefully things will work as they are intended to.
Since early February and March, I’ve been talking (and thinking) about upgrading my home computer. And I’m finally making some inroads to the situation. For whatever this is worth, here are the components I’ve firmly decided on:
I’m also looking at upgrading my video card (preferably to a GeForce 7900GT), but I don’t know which brand to go with. I currently have a card manufactured by eVGA, and as I have mentioned before, it runs a tad warm. I’ve also been reading about a number of stability problems with eVGA 7900 cards, although they recently did a 7900 series reload to fix some of the issues. As a result, I’ve been focusing on the XFX GeForce 7900GT (470MHz). The XFX model comes with stock speeds (most 7900 cards come factory overclocked, something I’m thinking I’d like to avoid) and it has fairly good reviews at NewEgg. The price, around $225 after rebate, isn’t bad either!
Had I fully made up my mind about a video card earlier this week, I would have gone ahead and ordered these components. But I’d rather spend some more time weighing my options. Suggestions? Comments? As always, they are welcome.
I recently ordered a Zalman VF900 VGA cooler for my NVIDIA GeForce 6800 GT. As I previously mentioned, the temperatures I’ve been seeing on this card have been incredibly hot. It would probably be safe to say that this was the primary factor in my frequent system crashes, but only time will prove that theory. Well, yesterday the cooler arrived and I installed it. Read on for my thoughts on the card, the results I’ve seen so far, and more.
My current graphics card, an eVGA GeForce 6800GT, has been running very hot recently. Spending time in Half-Life 2 or Oblivion causes temperatures in excess of 75 degrees Celsius, scorchingly hot by most standards. As a result of these high temperatures, video output routinely becomes corrupted, requiring a power-off of the machine to set things right. This occurrence seems fairly recent, and I’m not entirely certain why. My computer has always done a good job of controlling its temperature, thanks to my Cooler Master aluminum case. I’ve inspected all of my system’s fans: three of my four chassis fans (I’ve disconnected the one on top for being too noisy), the power supply fan, the CPU fan, and the fan on the graphics card. Each one seems to be spinning, and airflow doesn’t appear to be blocked.
I’ve been looking at building an entirely new system for some time now, and this problem is only pushing me closer to actually going through with it. Switching to a more energy-efficient AMD processor should help somewhat, and I plan on adding an after-market cooler to my new graphics card (I’m currently looking at a GeForce 7900 GT). Hopefully these steps will bring my system’s temperatures down considerably.
I’m beginning to spend more time thinking about how to upgrade my personal computer. As I have mentioned before, deciding what pieces of hardware to buy is frustratingly difficult, especially in today’s market. This time around, I’m trying to pay more attention to user reviews at sites like NewEgg, and less attention to the dedicated hardware “review” sites, which tend to consist of more previews than anything else.
I’m currently leaning towards getting the AMD Athlon 64 X2 4400+ CPU. I’m still trying to track down a good motherboard, and then I’ll have to pick some memory and, quite possible, a new power supply. Throw in a couple of new SATA hard drives (the Maxtor drives I have are real crap), and a new graphics card, and you’ve got a brand new system.
I’m probably going to end up spending a large chunk of change on this upgrade, but I think it will be worth it. Selling my current components on eBay should offset the cost somewhat. I’ve always done a good job of taking care of my stuff, and I tend to keep the boxes that components come in, so that should help increase the price I get by auctioning them off. Plus, I’m getting a performance bonus at the end of this month at work, and that can only help.
Were I to have my way, and were I to know exactly what I want, I’d order the components today. But seeing as this upgrade is going to be rather expensive, I’m resigned to waiting a bit. I’ll clearly have to put Amazon purchases and the like on hold for several months after I make this move. The old bank account can only handle so much spending.
The LA Times is reporting that Google is slowly switching to AMD-based processor solutions for their 200,000+ (!) servers. This is a most interesting report, especially since Intel has owned the vast majority of processor market share for so long. Could AMD be the David to Intel’s Goliath?
On a completely unrelated note, I’ve about decided to put off upgrading my personal computer. Not only does convoluted hardware make it hard to find what to buy, but things change so quickly (especially as far as prices are concerned). Instead of upgrading little bits now, I’m planning on building a completely new rig from scratch later this year (with any luck). Although I don’t have any details in place, I do have these general milestones I want to hit:
Waiting a while will allow me to (a) save some money up and (b) allow prices on today’s hot hardware to fall. I generally like buying stuff one generation back from the bleeding edge. You seem to get the most bang for your buck that way.
I have recently been toying with the idea of upgrading my personal computer (although I don’t use it near as much as I used to). I’d like to double my system memory, get a faster processor (a new motherboard as a result), and replace my SATA hard drives (which have been surprisingly disappointing).
The problem is that computer hardware is complicated, and it’s getting more so all the time. I remember spending weeks researching various options for my last major upgrade; and that was well over two years ago! Since that time, processor model numbers have become increasingly complicated and motherboard options seem to have multiplied several times. Adding to my frustration are hardware review sites such as Anandtech and Tom’s Hardware, both of which make the assumption that readers spend each and every day staying up to date with hardware trends. Don’t they realize that there are those of us who look at hardware on an incredibly infrequent basis? Thankfully, Tom’s Hardware has some charts that they keep updated on a semi-regular basis for graphics cards, processors, and hard drives. The benchmarks within them are handy for people like me, who just want to get a feel for where things are.
I am thinking about moving to an AMD processor this time around. I’ve always used Intel Pentium chips, but the AMD solutions seem way more affordable. Can anyone recommend an AMD CPU / motherboard combination that would work well for gaming? It clearly needs to be faster than my current setup (P4 - 2.8GHz), but I don’t want to pay thousands of dollars for it. Why can’t any of this stuff be easy?
Yesterday, I received my NEC FE2111SB 22″ CRT monitor from Azatek.com, and I finally got a chance to set it up this morning. What a beauty! The monitor was listed as “not exactly new” on Azatek’s web page. I have found only two flaws with the monitor: the face plate is lightly scratched (you have to be looking for it to see it) and one of the buttons on the front plate is indented (it looks like it’s stuck in the depressed position, but the button is completely functional - it’s just cosmetically out of line with the others). Both of these items are minor; I think they give the monitor “character”.
I only have good things to say about Azatek. I placed my order last weekend (on Friday morning) and was assured that it would be mailed that day. When I received notification from UPS that it had not been mailed, I contacted Azatek’s customer service. They promptly replied via email, stating that the monitor was not able to fit in that day’s UPS shipment (the box this thing came in is gigantic, and apparently the UPS truck was full of other packages). My monitor was sent out first thing Monday morning, and got here (via UPS ground) yesterday. The monitor was extremely well packaged (these folks really know what they are doing) and it’s in awesome shape! If you’re in the market for a CRT, check Azatek out. I was pleasantly surprised by their fast, friendly service. And the low, low price of $337.80 (that includes shipping) didn’t hurt either!